Audi E-TRON (2020-Current) Slimline II Roof Rail Rack Kit by Front Runner - KRAE001T

This 1358mm/53.5'' long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Audi E-TRON. This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling is required.

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

NOTE: Your vehicle must be equipped with the factory/OEM roof rails to use this rack kit. This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. For a stronger expedition-grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted.

All Front Runner Racks are backed by a Limited Lifetime Warranty*

Factory Rail Rack Kits are designed as a 'light duty' cargo solution. Please refer to your vehicle's owner manual for the manufacturers’ recommended load rating and do not exceed these limits.

For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and that all weight is distributed evenly across the rack.

Factory Rail Rack Kits are not suited for extreme off-road conditions. Therefore, you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use.

Consisting of:

• 2x GOFR001 - Rail Foot Base (Pair)
• 2x GOFR014 - Flush Rail Outer Grips / No. 6
• 2x GOFR036 - Flush Rail Inner Grips / G1
• 1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)
• 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
• 1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)

Material Used:

• Black epoxy powder-coated T6 aluminium
• High strength steel

Approximate Installed Weight: 25.26kg (55.69lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack:

• If using Feet or Grab-on Feet, add the height of the Slimline II Tray (50mm/2'').
• If using Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs.
• If using Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails.

To determine the height of the rack from the crown (highest point) of the vehicle's roof.

Shipping Dimensions:

• Width: 440mm (17'')
• Length: 1730mm (68'')
• Height: 170mm (7'')

Shipping Weight: 29kg (64lbs)