5% OFF
Run your favourite appliances you’d usually use at home from your 12V system with HardKorr's 1000W inverter. Allowing you to power multiple appliances up to 1000W, including chargers, kettles, air fryers, hair dryers, and your Starlink system, our inverters will change the way you go off-grid.
The unit has an inbuilt AC Transfer switch function that seamlessly transitions your inverter from running off your 12V battery supply to mains power. Useful for those travelling in caravans, camper trailers, touring setups, or boats, it’s ideal when you’ve decided to set up somewhere where you’ve got access to mains/AC power, like at a powered site at a caravan park. The feature will cut the inverter’s 12V supply when it detects AC power, saving your batteries from discharging and allowing for a more efficient power transfer. The AC switching feature is easy to use too – plug the included IEC lead into the inverter, then hook the other end to a mains power point and turn the power on.
Producing a pure sine wave output, the inverters will generate consistent, smooth, and clean power, just like you’d get from a mains connection. This means that the inverter will comfortably power sensitive appliances without the risk of damaging them. Appliances that require a higher wattage to start up can also be run – the 1000W inverter will produce up to 2000W for 2 seconds. Engineered with a larger heat sink and advanced internal circuitry, the inverter runs noticeably quieter than other inverters, even when running larger loads.
The inbuilt Residual Current Device (RCD) switch is arguably the inverter’s most important safety feature. Operating very similarly to your house system, the RCD Switch is made to detect anomalies running through your inverter and then immediately shut off the supply to reduce the risk of injury, damage, and electrocution. Additionally, the inverter has inbuilt over/under-voltage, short-circuit/overload, and over-temperature protections.
Giving the inverter the ability to run more conservatively, our 1000W model has an eco-mode function. When turned on, this function will drop the inverter’s output so that when there is no detected output, the unit will run with a draw of less than 0.2A rather than 1.3A.
On top of the inverter, the screen displays useful information about the inverter’s draw and condition. In real-time, it will show the input voltage, output voltage, outgoing current, and the inverter load capacity.
The inverter comes complete with a heavy-duty mounting flange to secure the unit, an IEC-C19 lead for the AC input, and a remote control with 5m lead.
The HardKorr Guarantee
All Hardkorr products are manufactured using the highest quality materials. They are confident that they are the most durable in the market and will give you many years of reliable service. HardKorr stand behind this product with a comprehensive 2 Year Australian warranty.
Power
- Continuous Power: 1000W
- AC Surge Power: 2000W
- AC Output: Pure sine waveform, 240V, 50Hz, 4.2A
Input
- Input DC Range: 10.5-15.5V
- Efficiency: Full load >89%, Half load >92%
- Standby Current Draw: <1.1A
- Eco-Mode Current Draw: N/A
Outlets
- Outlets: 1 x IEC Type I
Temperature
- Operating Temperature: -20°C / 45°C
- Storage Temperature: -30°C / 70°C
Protections
- Over/Under Voltage Protection
- Short Circuit/Overload Protection
- Over-Temperature Protection
- Over Voltage Protections: 15.5±0.2V DC
- Under Voltage Protections: 10.5±0.2V DC
Dimensions
- Dimensions: 404.4mm x 209mm x 78.7mm
Certifications
- AS/NZS 4763:2011
- IEC/EN 62368-1
Pack Contents
- 1x 1000W Pure Sine Wave Inverter
- 1x Inverter Remote
- 1x IEC-C13 Lead
- 1x 5m Cable Adapter for Remote
SKU | HKPINVAC1000 |
---|---|
Barcode # | 9350466004472 |
Brand | HardKorr |
You May Also Like
5% OFF
5% OFF